The outdoor wireless CPE with a single Ethernet port and a 802.11bgn radio (sehe #36 (closed) )
Specifications:
QCA9531 SoC
1x 10/100 Mbps Ethernet with PoE-in support
64 MB of RAM (DDR2)
16 MB of FLASH
5 dBi built-in antenna
POWER/LAN/WLAN green LEDs
4x RSSI LEDs (2x red, 2x green)
UART (115200 8N1) and GPIO (J9) headers on PCB
Flashing instructions:
The original firmware is based on OpenWrt so a sysupgrade image can be installed via the stock web GUI.
The U-boot bootloader also contains a backup TFTP client to upload the firmware from. Upon boot, it checks its ethernet network for the IP 192.168.1.10. Host a TFTP server and provide the image to be flashed as file firmware_auto.bin.
