Add Comfast E130N

The outdoor wireless CPE with a single Ethernet port and a 802.11bgn radio (sehe #36 (closed) )

Specifications:

• QCA9531 SoC
• 1x 10/100 Mbps Ethernet with PoE-in support
• 64 MB of RAM (DDR2)
• 16 MB of FLASH
• 5 dBi built-in antenna
• POWER/LAN/WLAN green LEDs
• 4x RSSI LEDs (2x red, 2x green)
• UART (115200 8N1) and GPIO (J9) headers on PCB

Flashing instructions:

The original firmware is based on OpenWrt so a sysupgrade image can be installed via the stock web GUI.

The U-boot bootloader also contains a backup TFTP client to upload the firmware from. Upon boot, it checks its ethernet network for the IP 192.168.1.10. Host a TFTP server and provide the image to be flashed as file firmware_auto.bin.

added Router-Support label

Daniel hat es getestet: http://51042.freifunk-dresden.de/

Gerätelaufzeit:	22:43:29 up 1:47, load average: 1.56, 1.43, 1.40
System:	mips Qualcomm Atheros QCA9533 ver 2 rev 0
Geräteinfo:	COMFAST CF-E130N v2 - Qualcomm Atheros QCA9533 ver 2 rev 0 [comfast,cf-e130n-v2]
Firmware-Version:	Freifunk Dresden Edition 6.0.15 / OpenWrt SNAPSHOT r13375-ad84c09502
Freier Speicher:	35160 kB von 60328 kB

changed the description

merged

mentioned in commit aa83e049