Firmware merge requests
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests
2019-09-12T10:24:41Z
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/2
Add Netgear R6220
2019-09-12T10:24:41Z
Yaroslav Petrov
Add Netgear R6220
Netgear R6220 Router auf MediaTek MT7621 basis: #13
* DualCore (2C/4T, 880 MHz) Router
* LAN x4 Ports (1Gbit)
* WAN x1 Port (1Gbit)
* WLAN1: 2,4Ghz
* WLAN2: 5Ghz (AC)
see Knote 51083
Netgear R6220 Router auf MediaTek MT7621 basis: #13
* DualCore (2C/4T, 880 MHz) Router
* LAN x4 Ports (1Gbit)
* WAN x1 Port (1Gbit)
* WLAN1: 2,4Ghz
* WLAN2: 5Ghz (AC)
see Knote 51083
Firmware 6.1.0
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/3
WIP: Ath10k Candela Technologies CT 10.1 Firmware statt standart Ath10k
2019-12-08T17:31:36Z
Yaroslav Petrov
WIP: Ath10k Candela Technologies CT 10.1 Firmware statt standart Ath10k
* Getestet an BT HomeHub 5 A
TODO: Firmware für Archer C7 v1.1 (openwrt-19.07) bauen und testen
* Getestet an BT HomeHub 5 A
TODO: Firmware für Archer C7 v1.1 (openwrt-19.07) bauen und testen
Firmware 6.1.0
Yaroslav Petrov
Yaroslav Petrov
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/4
build.sh, fritzbox 7360SL
2019-09-15T20:39:32Z
Stephan
build.sh, fritzbox 7360SL
- remove log facility from build.sh to have correct error code processing.
- add fritzbox 7360 SL (wan not working yet)
- remove log facility from build.sh to have correct error code processing.
- add fritzbox 7360 SL (wan not working yet)
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/5
routing: reorder routing rule for fallback_gateway. local inet traffic would...
2019-09-15T21:52:20Z
Stephan
routing: reorder routing rule for fallback_gateway. local inet traffic would...
routing: reorder routing rule for fallback_gateway. local inet traffic would be routed to dead ip if mesh-on-lan/wan is active and either of those interfaces had a gateway configured
routing: reorder routing rule for fallback_gateway. local inet traffic would be routed to dead ip if mesh-on-lan/wan is active and either of those interfaces had a gateway configured
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/6
fix update parameter for geoloc update
2019-09-15T22:00:21Z
Stephan
fix update parameter for geoloc update
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/7
correct some configs for netgear r6220 (fix compile error: conflicts with oth...
2019-09-16T22:04:17Z
Stephan
correct some configs for netgear r6220 (fix compile error: conflicts with other wpad packages)
'correct some configs for netgear r6220 (fix compile error: conflicts with other wpad packages)
'correct some configs for netgear r6220 (fix compile error: conflicts with other wpad packages)
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/8
update openwrt configs, remove vpn1
2019-09-23T23:47:01Z
Stephan
update openwrt configs, remove vpn1
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/9
merge: download: display firmware version (index.html)
2019-09-25T22:07:46Z
Stephan
merge: download: display firmware version (index.html)
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/10
Advanced runner configuration
2019-10-02T09:10:00Z
Yaroslav Petrov
Advanced runner configuration
* SSL checks
* Cache folder
* Additional hosts
* SSL checks
* Cache folder
* Additional hosts
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/11
x64 KVM QEMU Variante
2019-10-02T20:04:26Z
Yaroslav Petrov
x64 KVM QEMU Variante
Yaroslav Petrov
Yaroslav Petrov
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/12
Lantiq devices (Request #12)
2019-10-02T20:51:49Z
Yaroslav Petrov
Lantiq devices (Request #12)
* add icu smp support & vanilla ethernet driver
* add Fritzbox 3370
* add Fritzbox 7360
* add Fritzbox 7412
* add BT 5
need test
* add icu smp support & vanilla ethernet driver
* add Fritzbox 3370
* add Fritzbox 7360
* add Fritzbox 7412
* add BT 5
need test
Yaroslav Petrov
Yaroslav Petrov
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/13
WIP: Add 802.11s support (issue #5)
2020-07-05T19:28:00Z
Yaroslav Petrov
WIP: Add 802.11s support (issue #5)
Now it's possible to configure ddmesh-wifi (ADHOC only or ADHOC + 802.11s)
We're use wpad-mesh-openssl package
Config example:
```
config wifi-iface ...
Now it's possible to configure ddmesh-wifi (ADHOC only or ADHOC + 802.11s)
We're use wpad-mesh-openssl package
Config example:
```
config wifi-iface
option network 'mesh'
option device 'radio0'
option network 'wifi'
option mode 'mesh'
option mesh_id 'Freifunk-Mesh-Net'
option ssid 'Freifunk-Mesh-Net'
option encryption 'none'
```
wireless info:
```
o2 Box 6431 @ r987:/# iw dev wlan0 station dump
Station ce:40:d0:96:ae:88 (on wlan0)
inactive time: 56 ms
rx bytes: 30054
rx packets: 422
tx bytes: 1001
tx packets: 9
tx retries: 12
tx failed: 4
rx drop misc: 2
signal: -22 dBm
signal avg: -22 dBm
Toffset: 149060327449 us
tx bitrate: 6.5 MBit/s MCS 0
rx duration: 0 us
mesh llid: 4882
mesh plid: 55447
mesh plink: ESTAB
mesh local PS mode: ACTIVE
mesh peer PS mode: UNKNOWN
mesh non-peer PS mode: ACTIVE
authorized: yes
authenticated: yes
associated: yes
preamble: long
WMM/WME: yes
MFP: no
TDLS peer: no
DTIM period: 2
beacon interval:100
short slot time:yes
connected time: 21 seconds
o2 Box 6431 @ r987:/#
```
messages:
```
o2 Box 6431 @ r987:/# tcpdump -i wlan0 icmp
[ 2515.015053] device wlan0 entered promiscuous mode
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on wlan0, link-type EN10MB (Ethernet), capture size 262144 bytes
12:15:51.918502 IP 10.201.7.240 > 10.201.3.223: ICMP echo request, id 45853, seq 71, length 64
12:15:52.927958 IP 10.201.7.240 > 10.201.3.223: ICMP echo request, id 45853, seq 72, length 64
12:15:54.007772 IP 10.201.7.240 > 10.201.3.223: ICMP echo request, id 45853, seq 73, length 64
12:15:54.950250 IP 10.201.7.240 > 10.201.3.223: ICMP echo request, id 45853, seq 74, length 64
12:15:55.957870 IP 10.201.7.240 > 10.201.3.223: ICMP echo request, id 45853, seq 75, length 64
```
ADHOC+AP+MESH
```
Netgear R6220 @ r2024:~# iw wlan0 info
Interface wlan0
ifindex 753
wdev 0x14
addr cc:40:d0:96:ae:88
ssid Freifunk-Mesh-Net
type IBSS
wiphy 0
channel 13 (2472 MHz), width: 20 MHz, center1: 2472 MHz
txpower 18.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets
0 0 3591 0 0 0 0 1091528 3591
Netgear R6220 @ r2024:~# iw wlan0-1 info
Interface wlan0-1
ifindex 754
wdev 0x15
addr ce:40:d0:96:ae:88
type mesh point
wiphy 0
channel 13 (2472 MHz), width: 20 MHz, center1: 2472 MHz
txpower 18.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets
0 0 69 0 0 0 0 4692 69
Netgear R6220 @ r2024:~# iw wlan0-2 info
Interface wlan0-2
ifindex 756
wdev 0x16
addr ca:40:d0:96:ae:88
ssid Freifunk Dresden [2024]
type AP
wiphy 0
channel 13 (2472 MHz), width: 20 MHz, center1: 2472 MHz
txpower 18.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets
0 0 2 0 0 0 0 122 2
```
am ende soll noch
```
/usr/lib/ddmesh/ddmesh-bmxd.sh add_if wlan0
```
ausgeführt werden.
TODO:
* [X] add wpad-mesh-openssl package
* [X] build test enviroment
* [ ] allow configure ADHOC and/or 802.11s via GUI
* [ ] test all targets
Firmware 6.4.x (802.11s - mesh)
Yaroslav Petrov
Yaroslav Petrov
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/14
rework build.sh/gitlab runner
2019-10-04T09:30:14Z
Stephan
rework build.sh/gitlab runner
remove cache/artifacts to speedup processing and reduce I/O load on host significantly.
build.sh now supports to set symlinks for dl and workdir so those data can be kept on runners machine persistently.
remove cache/artifacts to speedup processing and reduce I/O load on host significantly.
build.sh now supports to set symlinks for dl and workdir so those data can be kept on runners machine persistently.
Firmware 6.1.0
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/15
sync
2019-10-06T19:21:05Z
Stephan
sync
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/16
sync
2019-10-06T23:16:41Z
Stephan
sync
sync
sync
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/17
fix reading backbone keys from credentials
2019-10-07T17:23:30Z
Stephan
fix reading backbone keys from credentials
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/18
Add Fritzbox 7412 support
2019-10-14T23:32:43Z
Yaroslav Petrov
Add Fritzbox 7412 support
AVM FRITZ!Box 7412, Knote r51018 Installation erfolgt direkt über "sysupgrade -n"
```
AVM FRITZ!Box 7412 @ r51018:~# iw wlan0 info
Interface wlan0
ifindex 10
wdev 0x2
addr f0:b0:14:6c:2b:ee
ssid Freifunk-Mesh-Net
type IBSS
wiphy 0...
AVM FRITZ!Box 7412, Knote r51018 Installation erfolgt direkt über "sysupgrade -n"
```
AVM FRITZ!Box 7412 @ r51018:~# iw wlan0 info
Interface wlan0
ifindex 10
wdev 0x2
addr f0:b0:14:6c:2b:ee
ssid Freifunk-Mesh-Net
type IBSS
wiphy 0
channel 13 (2472 MHz), width: 20 MHz, center1: 2472 MHz
txpower 18.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets
0 0 176245 0 0 0 0 53543216 176332
AVM FRITZ!Box 7412 @ r51018:~# iw wlan0-1 info
Interface wlan0-1
ifindex 11
wdev 0x3
addr f2:b0:14:6c:2b:ee
ssid Freifunk Dresden [51018]
type AP
wiphy 0
channel 13 (2472 MHz), width: 20 MHz, center1: 2472 MHz
txpower 18.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets
0 0 0 0 0 0 0 0 0
```
Firmware 6.1.0
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/19
Fritzbox 7412 fix
2019-10-16T17:21:09Z
Yaroslav Petrov
Fritzbox 7412 fix
* add fritz_cal_extract & fritz_tffs_nand for all lantiq targets
* remove additional config
* add fritz_cal_extract & fritz_tffs_nand for all lantiq targets
* remove additional config
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/20
Add Fritzbox tools for Fritzbox4040
2019-10-18T14:14:18Z
Yaroslav Petrov
Add Fritzbox tools for Fritzbox4040
Add fritzbox tools (Issue #18 ):
* fritz-tffs-nand
* fritz-tffs
* fritz-caldata
Add fritzbox tools (Issue #18 ):
* fritz-tffs-nand
* fritz-tffs
* fritz-caldata
Firmware 6.1.0
Stephan
Stephan
https://gitlab.freifunk-dresden.de/firmware-developer/firmware/-/merge_requests/21
update readme
2019-10-26T11:45:54Z
Sven enniK
update readme
- add Documentation link
- add Issue link to gitlab-repo
- add Documentation link
- add Issue link to gitlab-repo